Custom Made Window Advertising using our sign customizer.

How this works. Pay by the Line, Add 'l cost for metallic lettering

Measure the width of your window and put that dimension in the customizer. (This is how we size the graphic).
We typically leave a margin of 2-4" on each side of the business name. The rest of the lines are sized to be typically less than the Business Name but we try to match the sizes shown in the customizer.
Go through the list in the customizer filling out the different fields.
The color of the graphic is selected at the bottom of the options list. Typically, this is white. If you want to mix colors contact us. There is an additional cost for mixed or custom colors.
The decal will have a transfer tape applied to the top of it. On the bottom is a backing paper. When you are applying the decal we recommend you cut the separate lines apart. This makes it much easier to apply versus applying the whole graphic. When we process your order it will come on one (maybe two) sheet.

How to apply window decals/graphics

The best way to apply the decals is the "hinge method". This refers to a piece of tape in the center that acts as a "hinge".
Make sure the Glass is clean.
Use painters tape to hold the decal line in place while you position, center, and level the decal. In the center of the decal place a piece of tape on the top and bottom attaching it to the glass.
Carefully cut the backing paper somewhere close to the center between letters.
Carefully pull a couple of inches of backing paper away from the letters and transfer tape.
Use a credit card (or like tool) to press the letters and transfer tape to the glass, while pulling the backing paper away. Do this slowly (this is where wrinkles happen). Once you have the backing paper removed, using the credit card burnish the letters to the glass.
Remove the tape you applied to the center and do the same thing to the other side.
Again, carefully and slowly pull the transfer tape away from the glass and the decal letters. If a letter tries to pull away with the transfer tape, gently push the letter and transfer tape back on, then burnish with the credit card and try again.
Once you get the transfer tape off you can carefully clean the glass.
It takes about 24-48 hours for the adhesive on the decal to adhere completely depending on conditions.

If you want something different such a different line color or graphics (Logo) reach out to us at CustomAddressSign@Gmail.com

Send a picture of your window along with its dimensions and we will work with you to design the advertising.

Filter and sort

Filter